Cloud Microphones Cloudlifter CL-1 and
CL-2 Mic Activator
A Must-Have Tool for Dynamics and Ribbons!
Cloudlifter CL-1 and CL-2 Mic Activator is an easy
to use, compact solution for common audio problems
faced in the field and in the studio. Designed for
all passive microphones - including ribbons- the
CL-1 and CL-2 safely uses any standard phantom
powered microphone input device to provide up to
+25db of ultra-clean, transparent gain. Cloudlifters
dramatically improve the performance of passive
microphone signals by driving stronger, cleaner
signals over longer XLR cable runs, making them
ideal for broadcast, live, and studio applications.
Enclosed in a rugged steel enclosure offering
excellent shielding, the ** CL-1 and CL-2
additionally has provisions for stage or stand
mounting with the included strap. Using patent
pending technology that keeps the direct audio path
free-and-clear of transformers, capacitors, and
resistors, the CL-1 and CL-2 houses direct-coupled,
discrete JFET circuitry that delivers world class,
ultra-clean gain while preserving the natural sonic
characteristics of the source.
Cloudlifters are recommended for improving the
signal to noise ratio and performance of passive
microphone/preamp combinations with the following:
- Recording direct into a DAW interface
- Noisy or low gain preamps
- Mixers/preamps that negatively impact the sound at
higher gain setting
- Passive ribbon microphones
- Low-output dynamic microphones
- Miking softer sound sources such as acoustic
instruments and voice
- Long cable runs (output)
Features:
- Gives passive mics up to +25dB additional active
output
- Provides 2 ultra-clean gain stages using 4
hand-matched JFETs
- Easy to use self contained design requires only
phantom power
- Recommended for use with all passive microphones
- Safe for all passive ribbons with no transfer of
phantom
- Utilizes Patent Pending Ultra-transparent Discrete
D/C JFET circuitry
- Ideal impedance loading for optimal performance
@3Kohms
- Rugged, road ready and portable, for studio, stage
and broadcasting
- Free lifetime limited warranty for parts and
labor, with registration
- Handcrafted entirely in the USA
NOTE: The CL-2 is a dual mono Cloudlifter.
The CL-2 offers two independent channels of up to
+25db of ultra-clean gain, for passive microphones,
inline using phantom power
NEW CL-Z
Maximize Your Mic Signal for Stage or Studio
The Cloud Microphones CL-Z mic activator uses
phantom power from your preamp to solve an array of
common issues with dynamic and ribbon microphones
while maximizing your signal’s quality, making it a
must-have box for your studio or live toolset. It’s
designed to be a middleman between your mic and
preamp, maximizing signal quality while driving long
cable runs. The direct-coupled, discrete JFET
circuitry preserves your signal’s integrity while
the CL-Z goes to work. You get control over the
input impedance to get the best out of any mic, and
a variable output level (+12 to +24dB) so you can
drive even the longest cable runs with ease. You
even get a variable low-cut filter to clean up your
signal before it ever graces your preamp. Whether
you run live sound or just use a variety mics on a
daily basis in your studio, you’ll love working with
the CL-Z mic activator!
Cloud Microphones CL-Z Mic Activator at a
Glance:
- Variable input impedance
- Hot but clean output
- Pre-preamp control and flexibility
- Variable input impedance
The Cloud Microphones CL-Z mic activator’s input
features variable impedance from 150 to 15k ohms.
Since every microphone is different, and typically
sound best at a specific input impedance, you can
tailor the CL-Z to any mic to get the best
performance. And even if your preamp features
variable impedance, the CL-Z lets you control this
near your mic – great if your mic pres are across
the room, let alone across a crowded venue!
Hot but clean output
Sometimes you need a little extra juice to get a
quality mic signal to your preamp, especially with
long cable runs. The Cloud Microphones CL-Z mic
activator makes it easy, adding 12 to 24dB of gain
to your signal, while the premium circuitry passes
your audio un-colored. It’s great for low-output
ribbon and dynamic mics in your studio, and it’s
awesome at driving long cable runs from the stage to
the board in live sound settings.
Pre-preamp control and flexibility
The CL-Z from Cloud Microphones is placed between
your mic and preamp, giving you access to the
additional gain and variable low-cut filter on the
CL-Z. In your studio, that makes it easy to optimize
your signal before it hits your preamp. Sure, your
preamp may have a filter, and maybe even variable
impedance – but it’s across the room, maybe even in
another room. The CL-Z lets you dial the filter in
and maximize your signal for a long cable run,
meaning you’ll be hitting your favorite preamp with
the best signal possible.
Cloud Microphones CL-Z Mic Activator at a
Glance:
Excellent way to maximize your microphone’s signal
quality, with problem-solving features and
impeccable sonic quality
Get the best sound possible out of any mic with the
variable input impedance
Low-cut filter is variable from 20Hz-250Hz to cut
out unwanted low end, optimizing your signal before
it ever hits your preamp
Great way to transparently increase the output of
ribbon and dynamic mics
Rugged steel enclosure for excellent shielding and
rock-solid reliability
Requires +48V phantom power from your preamp
Optimize any dynamic or ribbon microphone in your
locker with the Cloud Microphones CL-Z mic
activator!
Specification Detail
- Type Mic Activator
- Channels 1
- Inputs 1 x XLR
- Outputs 1 x XL
Cloud Microphones Cloudlifter CL-1 MSRP: $179.00-
Sale Price: $149.00
Single channel Cloudlifter
Cloud Microphones Cloudlifter CL-2 MSRP: $299.00-
Sale Price: $249.00
Two channel Cloudlifter
Cloud Microphones Cloudlifter CL-Z MSRP: $369.00-
Sale Price: $299.00
Single channel Cloudlifter w/ Variable input
impedance
